The Marcy Rain Sensor Gel Repair Kit [Product # RG1] is designed for the adhering of light and rain sensors on windshields that employ the gel adhesion system. This Refill Kit allows for the OE Sensor Lens to be reused, saving time and money for the installer while preserving the OE standards of the vehicle.

• Re-Use OE Sensor Lens
• Save Time and Money
• Preserve OE Standard of Vehicle

RG1 Includes everything you need to restore your rain sensor quickly and effectively:

1) Mix Nozzle
2) Syringe with special adhesive
3) Plunger rod
4) Light and rain sensor cover

Rain Sensor Gel Refill Kit Application Instructions Part #RG1
Installation Instructions:

1) Completely remove old adhesive gel from sensor. Wipe clean.

2) Remove syringe cap by twisting it off.

3) Attach nozzle by twisting it

4) Insert plunger rod into open end of syringe barrel.

 5) Empty completely syringe contents evenly on the rain sensor surface.

6) Put the cover on the rain sensor and allow it to cure for about 30 minutes (under normal room temperature) before fitting it in vehicle. Note: Entire surface area must be clean, dry and free of grease. Do not touch gel with fingers! For degreasing a suitable cleaner should be used.

Download Installation Instructions in PDF file format

RG1 Partial Application List:
Mercedes: SLK 2005-008 FW2881 , A-Class (WZ168 & WZ169) 2003-05 FW02695 , B-Class 2003-08 FW02695, Vito, Sprinter/ Nissan: Micra, 2005-08 FW02568/ Renault: Megane, Scenic/ Smart: Fortwo, 2005-2007 FW02507 Roadster 2003-2006 FW2689/ BMW: 5 Series (E60/E61) 2004-07 FW02448 or FW02449 or FW02675/ Cadillac: Escalade '07 DW01659/ Chevrolet: Avalanche, Pickup, Suburban, Tahoe '07 DW01659/ GMC: Pickup, Yukon '07 DW01659/ Dodge: Sprinter '07-'08 DW01720